12.3 Mixer Panel (Advanced Mode)
12.3.1 Input channels and invert input polarity
12.3.2 Input/Output channel intersection variable level conrols
12.3.3 Input/Output channel intersection level display box
12.3.4 Input/Output channel intersection summing button
12.3.5 Output channels 1-8 invert polarity boxes
12.3.6
12.4 Crossover Control Panel
12.4.1 Channels 1-8 crossover lter type window
12.4.2 Channels assigned name display
12.4.3 Channel crossover type check boxes
12.4.4 High Pass crossover lter type adjustment window
12.4.4.1 HP crossover slope selection window
12.4.4.2 HP crossover frequency selection controls
12.4.4.3 HP crossover damping selecton window
12.4.4.4 HP crossover “variable ”Q” adjustment control
12.4.4.5 HP crossover Bessel normalization controls
12.4.5 Low Pass crossover lter type adjustment window
12.4.5.1 LP crossover slope selection window
12.4.5.2 LP crossover frequency selection controls
12.4.5.3 LP crossover damping selection window
12.4.5.4 LP crossover variable “Q” adjustment control
12.4.5.5 LP crossover Bessel normalization controls
12.5 Signal Delay / Channel 1-8 Invert Polarity Control Panel
12.5.1 Channel 1-8 signal delay adjustment utility window
12.5.1.1 Channel assigned name display
12.5.1.2 Channel link/unlink buttons
12.5.1.3 Channel signal delay adjustment slider
12.5.1.4 Channel signal delay adjustment value
12.5.2 Channel 1-8 output invert signal polarity utility window
12.6 EQ Control Panel
12.6.1 Equalization channel selection panel
12.6.2 EQ channel selection check boxes
12.6.3 EQ channel assigned name display
12.6.4 EQ channel frequency value readout display
12.6.5 EQ channel selection, All channels check/uncheck
12.6.6 EQ plot channel selection check boxes
12.6.7 EQ plot selection all channels check/uncheck
12.6.8 Parametric EQ mode selection
12.6.9 1/3rd Octave eq mode selection
To Next Page
Loading...