12.6.10 Equalization adjustment and controls
12.6.10.1 Individual frequency adjustment slider and bar
12.6.10.2 Individual frequency adjustment ne adjustment buttons
12.6.10.3 Individual band frequency center readout display
12.6.10.4 1/3rd Octave EQ mode “All Flat” Button
12.6.10.5 1/3rd Octave EQ mode “All 1/3rd Octave” reset button
12.6.10.6 Parametric EQ band ne tuning controls
12.6.10.7 All 1/3rd Octave reset button
12.6.10.8 Parametric EQ band, variable frequency selection slider
12.6.10.9 Parametric EQ band variavle frequency value display
12.6.10.10 All “Q’s” reset button
12.6.10.11 Parametric EQ band variable “Q” slider
12.6.10.12 Parametric EQ band variable “Q” value display
12.6.10.13 EQ frequency plotting chart dispaly
12.7 Signal output control panel
12.7.1 Master volume control
12.7.2 Output channels 1-8 signal trim control
12.7.3 Channel trim level value readout display
12.7.4 Output channel trim adjustment slider
12.7.5 Channel trim all channels link/unlink button (Tandem)
12.7.6 Output fader controls
12.7.7 Output fader level value readout display
12.7.8 Output fader adjustment slider
12.7.9 Channel name and assigned faders panel access button
13.0) Master Volume Output Control
13.1 Master volume control
13.2 Master volumecontrol indicator
14.0) Bottom Header User Sotware Graphic Feature Overview
14.1 Output channel muting
14.2 Electronic serial number display verication
14.3 Preset selection buton and status indicator
14.3.1 Software position preset status selection and status button
14.3.2 PS8 hardware physical position preset selection and status button
14.4 Oine mode seleciton box
14.5 Phase lock
14.6 Digital Indicator
14.7 USB connection indicator
14.8 System voltage display
14.9 PS8 Internal DSP core temperature
15.0) Replacing/Upgrading The PS8’s Output Devices