Atlas Copco FOCUS 61 - Page 44

Programming Focus 61 Focus 61 User Guide
9839 0211 01 Edition 2.0 44 (118)
To remove a MWR from the Group:
• Drag the MWR to be removed to the trash bin,
or right-click the MWR to be removed and select
Remove Wrench.
To remove a group from a Station:
• Drag the Goup to be removed to the trash bin, or delete all the wrenches within the Group.
The Stop icon ( ) marks the MWR that is associated with the
Station, but not connected (due to the fact that it is powered off or out
of range):
NOTE: The status of the MWR is refreshed dynamically in real time.
NOTE: Relink Wrench option relinks the
selected wrench to a specific Station.
NOTE: A MWR can only be removed if it
is not linked/used in a Job anymore.
NOTE: A Group linked to a job can not be removed.