SmartROC D65 T4F 8 Drilling
102 No: 713944459.6 en
n Water mist on at backward feed: When the drill bit moves backward, water mist is
activated. Air on backward feed must also be activated for the water mist to work on
backward feed.
n Water mist pump speed: The speed of the water mist pump (0-100%). This para-
meter is only valid if water mist is selected.
8.1.3 Direct selection menus
In order to read or change values in the various menus for drilling, the operator must activ-
ate the correct menu. The direct selection menus F1-F4 can be activated using the direct
selection buttons (F1 - F4). Direct selection menu F5 is activated by pressing the Fn but-
ton and then the right-hand button F1. (Fn is activated for 3 seconds after each press of
the button.) Below is a description of the five direct selection menus.
To Next Page
Loading...
