Atlas Copco SmartROC D65 T4F

SmartROC D65 T4F 6 Operating
59 No: 713944459.6 en
6 Operating
6.1 Before starting
6.1.1 To be checked before each start.
WARNING
Serious injury
Danger of moving parts
u Can cause serious personal injury
u Set all levers and switches in NEUTRAL position before start-up preparations
u Carry out the procedures with the engine switched off
WARNING
Serious injury
Dangerous compressed air
u Can cause serious injury
u Release the pressure in the tank before removing the filler plug
6.1.2 Checks
!
NOTE: For further instructions, see "Maintenance instructions"
Check point Inspection Instructions
Hydraulic oil Oil level The recommended oil level is
half way up the upper sight
glass. Make sure the drill rig is
in the transport position before
checking.
Top up as necessary.
Lubrication Oil level Top up as necessary.
!
NOTE: Make
sure the tank
is always at
least 1/4 full
with oil.