Atlas Copco SmartROC D65 T4F User Manual

SmartROC D65 T4F 10 Options
175 No: 713944459.6 en
If there is a risk of freezing, the tank should be emptied and the system flushed with anti-
freeze before leaving the rig overnight or for the weekend. Flushing is performed from Dir-
ect selection menu F2.
The filter (C) should be regularly dismantled and cleaned.
10.8 Service Winch
WARNING
Serious injury
Using the winch often involves working with a suspended load.
u Work on suspended loads may cause serious personal injury.
u Make sure that the winch cable and attaching devices are free from defects.
WARNING
Risk of damage to winch arm
If the winch is used when the feed beam is placed outside the vertical position, the
winch arm may break and cause injury or death.
u The winch may only be used when the feed beam is placed vertically at 90°.
10.8.1 General instructions
Service winch control lever
1 Control lever - service winch

Atlas Copco SmartROC D65 T4F Specifications

General

Brand	Atlas Copco
Model	SmartROC D65 T4F
Category	Construction Equipment
Language	English