Atlas Copco SmartROC D65 T4F

SmartROC D65 T4F 10 Options
209 No: 713944459.6 en
10.14 Fuel saving unit
The fuel saving unit requires minimal monitoring from the machine operator. The following
settings are made by the operator:
n Air pressure
n Air flow
n AUX air pressure
n AUX hydraulic pressure
10.14.1 Air pressure and air flow
1.
Press the F1 button on the display.
2.
Enter the desired low percussion air flow (%) in field (A).
3.
Enter the desired full percussion pressure (bar) in field (B).
10.14.2 Activate AUX air pressure and hydraulic pressure
1.
Press the F2 button on the display.
2.
Select Settings 2.