SmartROC D65 T4F 10 Options
137 No: 713944459.6 en
10 Options
10.1 Fire suppression system
10.1.1 Semi automatic fire suppression system
Safety
CAUTION
Risk of injury
On delivery of a new rig from the factory, the semi-automatic fire fighting system is dis-
connected due to transport restrictions. It must be reconnected before the rig is put in
use.
DANGER
Serious injury or death
The fire fighting system's fuel gas cylinders must not be removed by unauthorised ser-
vice personnel. The cylinders are pressurised at 145 bar, which can be lethal if handled
incorrectly.
DANGER
Serious injury or death
The fire fighting system's gas generators contain a small charge and can cause serious
injury. They must not be handled by unauthorised personnel. A gas generator must not
disposed of in normal waste but shall be handled as hazardous goods and sent for de-
struction.
System description
The semi-automatic fire fighting system comprises an extinguishing system and a fire
alarm. The system has a combined manual/automatic activation. When the machine is in
operation with enabled blocking, the system must be activated manually in case of a fire
alarm, either with the push button on the operator's panel in the cabin or the mechanical
device outside the machine.
When the machine is not in operation with deactivated blocking, the system will trigger
automatically when the fire alarm starts.