Atlas Copco SmartROC D65 T4F User Manual

SmartROC D65 T4F 10 Options
181 No: 713944459.6 en
Now the boom system's coverage area can be seen on the screen. This area is used in the
fine navigation menu for viewing which holes can be reached from the current position.
10.10 Reverse camera
10.10.1 Description of the display
Display
Pos. Function Description
1 Camera selection Press the button. The camera's
LED flashes in order to show
that manual camera selection is
active. Use the plus and minus
keys to select camera. Press the
button again to activate camera
selection.
2 Background lighting There are three setting modes:
n Automatic control of back-
ground lighting (ABC)
n Day setting
n Night setting
3 Contrast setting Press the button to activate the
setting mode. Use the plus and
minus keys to select contrast.
Press the button again to activ-
ate the setting.
4 Brightness setting Press the button to activate the
setting mode. Use the plus and
minus keys to select brightness.
Press the button again to activ-
ate the setting.

Atlas Copco SmartROC D65 T4F Specifications

General

Brand	Atlas Copco
Model	SmartROC D65 T4F
Category	Construction Equipment
Language	English