Atlas Copco SmartROC D65 T4F

SmartROC D65 T4F 4 Daily checks
35 No: 713944459.6 en
4.5.2 Display
Display.
Check point Inspection Instructions
Display Visual check Check that no fault indicator
symbols are shown. If a fault in-
dicator shows in the status field,
stop the drill rig and rectify the
fault.
Table11: Display.
4.5.3 Dust collector (DCT)
Check point Inspection Instructions
Dust collector (DCT) Suction ability and filter cleaning In case of dust formation: Check
the filter in the filter holder and
suction hose and also the drill-
steel support's drill gasket.
Table12: Dust collector (DCT).
4.5.4 Drill rig
Check point Inspection Instructions
Drill rig Visual check Look for any signs of leaks.
-Hydraulic systems
-Fuel system
-Cooling system