SmartROC D65 T4F 10 Options
140 No: 713944459.6 en
CAUTION
Risk of injury
Due to the risk of re-igniting, be prepared with a fire extinguisher before returning to the
machine
Open the ventilation hatches to exhaust the smoke and gas. Avoid breathing in the fire
gases. Get in touch with a qualified Atlas Copco service engineer as soon as possible.
Do no restart the machine until a qualified service engineer has established the cause of
the fire and any faults have been rectified.
10.2 Rig Remote Access (RRA)
10.2.1 General
RRA is a package of communication options which make the rig accessible via the user's
data network.
If RRA is installed, the operator does not need to load drill plans via a USB memory. The
log files are saved to the rig CCI where the planning department can retrieve information
via wireless transmission. The latest plans are always accessible from the rig.
From the office computer, one can:
n View the rig statistics - e.g. percussion hours
n Upload saved log files.
n Obtain information on rig guards and alarms.
The rig cannot be remote controlled nor any changes made to the rig menu via the
RRA system.
To Next Page
Loading...
