SmartROC D65 T4F 6 Operating
71 No: 713944459.6 en
6.8.4 Forced regeneration
Forced regeneration can be started between 1100-1800 rpm. The conditions are the same
as for automatic, except that it is permitted to start at a soot level between 15-100%.
n For forced regeneration the symbol (F) in menu F1 in the display is marked and the
enter button is pressed for 5 seconds.
n That forced regeneration has started is shown with the symbol high exhaust temper-
ature (E) .
n Return to automatic regeneration by performing one of the following options:
l restart the drill rig
l complete forced regeneration.
To Next Page
Loading...
Need help?
General
