SmartROC D65 T4F 8 Drilling
113 No: 713944459.6 en
Drill lever functions.
The rotation unit is unthreaded from the drill rod when the shank adapter is free from the
sleeve.
1.
Move the drill lever to neutral.
2.
Activate rapid feed up, drill lever position (c).
3.
The cradle stops automatically above the carousel so that a new drill rod can be ad-
ded.
4.
Move the drill lever to neutral.
!
NOTE: The drill rod retraction function must be deactivated, the di-
ode on the button must not be on.
To Next Page
Loading...
