SmartROC D65 T4F 10 Options
178 No: 713944459.6 en
Hole Navigation Status Information - Trimble system
Hole Navigation Status Information - Rigs equipped with Trimble system.
The Hole Navigation Status Information menu contains information on the system and
can be useful for fault finding. When the yellow lamp Hole Navigation Warning is illumin-
ated in the status bar, this menu has to be activated in order to obtain more detailed in-
formation on the cause.
n Date: Current date that Moving Base and Rover are sending (month:day:year).
n UTC Time: Current UTC time that Moving Base and Rover are sending (hours:
minutes:seconds:hundredths of a second).
n Sat in Use: Number of satellites that Moving Base and Rover have contact with.
n DOP: DOP-Moving Base number for Rover.
n Quality Indicator: Quality indicator for Moving Base and Rover. When the system is
OK it shows 3 3.
n Northing: Northerly coordinate in metres for Moving Base.
n Easting: Easterly coordinate in metres for Moving Base.
n Height: Elliptic height in metres for Moving Base.
n Yaw: Side angle for Rover Antenna in degrees, positive clockwise, northerly direction
is zero.
n Tilt: Height angle for Rover Antenna in degrees.
n Range: Distance ( Baseline) to Rover Antenna in metres.
n GPS Serial Com: Communication parameters and status for serial communication
between CCI and Moving Base.
n Bit Pos Northing: Northerly coordinate in metres for Drill bit.
n Bit Pos Easting: Easterly coordinate in metres for Drill bit.
n Bit Pos Height: Elliptic height in metres for Drill bit.
n Rig Heading: Rig compass direction in degrees, positive direction clockwise, north-
erly direction is zero.
To Next Page
Loading...
