SmartROC D65 T4F 10 Options
193 No: 713944459.6 en
Control box for cone splitter
1 Opening/closing the valve between the cyclone
and intermediate chamber
2 Switch the blowdown valve between drill and
blowdown position (option)
3 Opening/closing the valve between the intermedi-
ate chamber and cone splitter
4 Setting the cyclone and splitter inclination
5 Setting the cyclone and splitter position
6 Swinging out the cone splitter
Arm
The arm is locked with 3x M16 bolts, either in drilling position (A) or in tramming po-
sition (B).
It is also possible to lock the arm in position C (20°). In this case, 2x M16 bolts are re-
quired.
To Next Page
Loading...
