Atlas Copco SmartROC D65 T4F - Page 203

SmartROC D65 T4F 10 Options
203 No: 713944459.6 en
Add new drill bit, drill hammer or drill rod
1.
Open the Administrate consumables menu.
2.
Enter a new drill bit, drill hammer or drill rod plus the relevant diameter in the top field.
Use the keypad on the screen. Then click on Add.
!
NOTE: A new object can only be added if there is room in the sys-
tem. A warning is shown if there is a problem. A maximum of 10
drill bits, 10 drill hammers and 30 drill rods can be stored in the sys-
tem.
Remove drill bit, drill hammer or drill rod
1.
Open the Administrate consumables menu.