1
INTRODUCTION
This Service Manual describes procedures for inspecting, repairing and changing the settings of the Incu i. It also
describes precautions and troubleshooting in alarm conditions. The procedures described in this Service Manual
should be carried out only by personnel trained in electricity and the operation of the unit. Neither Atom Medical
Corporation nor its representative will be responsible for the quality and performance of the unit if the unit should
not be handled as instructed or if unauthorized parts should be used in repairs. It should be noted that any respon-
sibility arising from inspecting, repairing or changing the settings of the unit lies with the person who carried it
out.
Read this Service Manual carefully and familiarize yourself thoroughly with its contents before inspecting, repair-
ing or changing the settings of the unit. Keep this Manual where it is readily accessible for reference when needed.
For more detailed information on inspecting, repairing and changing the settings of the unit, contact your local
Atom representative.
Read the Operation Manual thoroughly before using the Service Manual.
SAFETY INFORMATION
Please read the Manual carefully before operating the unit. Please follow the instructions when operating the unit.
z Basic Instructions
1. Medical institutions are responsible for the maintenance, inspection and care of the unit.
2. When you choose to have the unit maintained and inspected or when the unit is found to be in need of repairs
from the results of inspection, consult your local Atom representative and take one of the following mea-
sures.
1) Ask someone who has completed a training course specified by Atom and who has sufficient technical
knowledge and skills to do the work.
2) Ask Atom to send its service engineer if a person who has completed a training course specified by Atom
and who has sufficient technical knowledge and skills is not available.
3) Ask Atom for its approval of returning the unit for repair service.
3. Follow the instructions for safety.
Read the operating precautions thoroughly before operating the unit.
4. Inspect the unit on a periodical basis.
Periodical inspection is needed to use the unit in the optimum condition.
5. Ensure that the unit will not be used if it is found to be defective.
Take proper measures to ensure that a defective unit will not be used by mistake before it is properly inspected,
repaired and has its settings changed for normal operation. Such measures include indicating on the unit that it
is under inspection/repair and keeping it away from other devices that function correctly.
To Next Page
Loading...
