EasyManua.ls Logo

Atom Incu i 101 - Inspection Before Use

Atom Incu i 101
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Inspection
41
MAINTENANCE
[3] Maintenance Inspection
CAUTION
Medical institutions are responsible for performing the maintenance inspections.
They are allowed to entrust the maintenance inspections of the unit to an appropriate external
contractor.
Clean and disinfect the unit and its accessories before maintenance inspections, repairs, or dis-
posal.
Maintenance service should be performed properly by a qualified person in accordance with this
Service Manual.
Precautions in performing maintenance inspections
1. When you choose to have the unit maintained and inspected or when the unit is found to be in need of
repairs from the results of inspection, consult your local Atom representative and take one of the following
measures.
1) Ask someone who has completed a training course specified by Atom and who has sufficient technical
knowledge and skills to do the work.
2) Ask Atom to send its service engineer if a person who has completed a training course specified by
Atom and who has sufficient technical knowledge and skills is not available.
3) Ask Atom for its approval of returning the unit for repair service.
2. Read the operating precautions thoroughly before operating the unit.
3. Periodical inspection is needed to use the unit in the optimum condition.
4. Ensure that the unit will not be used if it is found to be defective.
Take proper measures to ensure that a defective unit will not be used by mistake before it is properly
inspected, repaired and has its settings changed for normal operation. Such measures include indicating on
the unit that it is under inspection/repair and keeping it away from other devices that function correctly.
In order to use the unit safely for a longer period, perform the maintenance inspections described below.
Inspection before use
Check the basic functional operation of each part of the unit every time you are going to use the unit.
Quarterly inspection
Check the operation of each function of the unit every three months.
However, the unit should be inspected at shorter intervals if it is used frequently.
Parts requiring periodical replacement
Some parts need to be replaced periodically depending on their period of use.

Table of Contents

Related product manuals