Cleaning and Disinfection
58
To replace the mattress platform tray to its former position,
make sure that it is engaged securely with the tilting arm.
Tilting arm
Mattress platform tray
• Middle board
With the admittance panels on both sides open, grasp one
end of the middle board with one hand and the concave por-
tion of the fan cover with the other hand. Then lift up the
middle board. Clean it with a soft cloth dampened with a dis-
infectant solution.
Middle board
Fan cover
• Fan cover
Open the fan cover and clean it with a soft cloth dampened
with a disinfectant solution.
Fan cover
Middle board
• Fan
Pull up and remove the fan. Immerse and clean it in a disin-
fectant solution. To replace the fan to its former position, push
it down firmly until it stops.
Fan
To Next Page
Loading...
