AudioCodes Mediant 3000 User Manual

Version 7.0 625 Mediant 3000
User's Manual 34. SBC Manipulations
Parameter Description
ManipulationName]
Matching Characteristics - Rule
Additional Manipulation
[IPInboundManipulation
_IsAdditionalManipulati
on]
Determines whether additional SIP URI user part manipulation is done for
the table entry rule listed directly above it.
 [0] No = (Default) Regular manipulation rule (not done in addition to
the rule above it).
 [1] Yes = If the above row entry rule matched the call, consider this
row entry as a match as well and perform the manipulation specified
by this rule.
Note: Additional manipulation can only be done on a different SIP URI,
source or destination, to the rule configured in the row above as
configured by the 'Manipulated URI' parameter (see below).
Manipulation Purpose
[IPInboundManipulation
_ManipulationPurpose]
Defines the purpose of the manipulation:
 [0] Normal = (Default) Inbound manipulations affect the routing input
and source and/or destination number.
 [1] Routing input only = Inbound manipulations affect the routing input
only, retaining the original source and destination number.
 [2] Shared Line = Used for the Shared-Line Appearance feature. This
manipulation is for registration requests to change the destination
number of the secondary extension numbers to the primary extension.
For more information, see ''BroadSoft's Shared Phone Line Call
Appearance for SBC Survivability'' on page 647.
Source IP Group
[IPInboundManipulation
_SrcIpGroupName]
Defines the IP Group from where the incoming INVITE is received.
The default is Any (i.e., any IP Group).
Source Username Prefix
[IPInboundManipulation
_SrcUsernamePrefix]
Defines the prefix of the source SIP URI user name (usually in the From
header).
The default is the asterisk (*) symbol (i.e., any source username prefix).
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 827.
Source Host
[IPInboundManipulation
_SrcHost]
Defines the source SIP URI host name - full name (usually in the From
header).
The default is the asterisk (*) symbol (i.e., any host name).
Destination Username
Prefix
[IPInboundManipulation
_DestUsernamePrefix]
Defines the prefix of the destination SIP URI user name, typically located
in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination username
prefix).
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 827.
Destination Host
[IPInboundManipulation
_DestHost]
Defines the destination SIP URI host name - full name, typically located in
the Request URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination host name).

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English