AudioCodes Mediant 3000 User Manual

User's Manual 862 Document #: LTRT-89730
Mediant 3000
Parameter Description
For more information, see ''Maintaining Same Syslog SID/BID over
Multiple Devices'' on page 798.
Activity Types to Report
via Activity Log Messages
[ActivityListToLog]
Defines the operations (activities) performed in the Web interface that
are reported to a Syslog server.
 [pvc] Parameters Value Change = Changes made on-the-fly to
parameters and tables, and Configuration file load. Note that the ini
file parameter, EnableParametersMonitoring can also be used to set
this option.
 [afl] Auxiliary Files Loading = Loading of Auxiliary files.
 [dr] Device Reset = Resetting of the device through the Maintenance
Actions page.
Note: For this option to take effect, a device reset is required.
 [fb] Flash Memory Burning = Saving configuration with burn to flash
(in the Maintenance Actions page).
 [swu] Device Software Update = Software updates (i.e., loading of
cmp file) through the Software Upgrade Wizard.
 [ard] Access to Restricted Domains = Access to restricted Web
pages:

(1) ini parameters (AdminPage)

(2) General Security Settings

(3) Configuration File

(4) IP Security Proposal / IP Security Associations Tables

(5) Software Upgrade Key Status

(6) Firewall Settings

(7) Web & Telnet Access List

(8) Web User Accounts
 [naa] Non-Authorized Access = Attempts to log in to the Web
interface with a false or empty username or password.
 [spc] Sensitive Parameters Value Change = Changes made to
"sensitive" parameters:

(1) IP Address

(2) Subnet Mask

(3) Default Gateway IP Address

(4) ActivityListToLog
 [ll] Login and Logout = Web login and logout attempts.
 [cli] = CLI commands entered by the user.
 [ae] Action Executed = Logs user actions that are not related to
parameter changes. The actions can include, for example, file
uploads, file delete, lock-unlock maintenance actions, LDAP clear
cache, register-unregister, and start-stop trunk. In the Web, these
actions are typically done by clicking a button (e.g., the LOCK
button).
Note: For the ini file parameter, enclose values in single quotation
marks, for example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard',
'naa', 'spc'.
Activity Trap
[EnableActivityTrap]
Enables the device to send an SNMP trap to notify of Web user activities
in the Web interface. The activities to report are configured by the
ActivityListToLog parameter.
 [0] Disable (default)
 [1] Enable
[EnableParametersMonitor
Enables the monitoring, through Syslog messages, of parameters that

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English