Field Names and Descriptions
Issue 3 May 2002
4-29
Use this screen as follows:
â– Use and to step through the pages.
â– To delete route entries:
1. Press or use the arrow keys to move the cursor to the line you
want to delete, and then press . (This deletes the entire line.)
2. The following prompt appears: Are you sure? (Y/N)
. Type Y
and press .
If you type N and press , the cursor reappears at the
beginning of the line and the line is not deleted.
3. Repeat steps 1 and 2 until you have deleted all desired routes. Then
press and the Network Routing Information menu
reappears.
â– To add routes, press to access the Add Routes screen.
Field Name Description
Destination Name or IP address of a host, or a partial IP address of a
network. Maximum field size = 20 characters.
Type The type of destination, either host or network. (Most
routes are to network destinations.)
Gateway Name or IP address of the gateway, the machine used to
route all traffic to the given destination. Maximum field
size = 20 characters.
Status Either up or down. If down, the gateway is not willing to
route any traffic.
PRVPG
DELETE
RETURN
RETURN
CANCEL
ADD