Avaya Definity - Page 121

Field Names and Descriptions
Issue 3 May 2002
4-39
Use this screen as follows:
■ To change the heartbeat state of a node ID:
1. Press or use the arrow keys to move the cursor to the line you
want to change, and then press .
2. The following prompt appears: Are you sure? (Y/N). Type Y
and press .
If you type N and press , the cursor reappears at the
beginning of the line and the state is not changed.
3. Repeat steps 1 and 2 until you have changed the heartbeat state for
all the desired node IDs. Then press and the previous
screen will appear.
■ To view or modify the list of clients using a node ID, press or use the
arrow keys to move the cursor to the line you want to view or modify, and
then press . You will then be placed into the CV/LAN
Administration — Assign Port for Node ID signalXX screen.
■ To modify the port number for a node ID, press or use the arrow keys
to move the cursor to the line you want to modify, and then press .
You will then be placed into the CV/LAN Administration — Assign Port
for Node ID signalXX screen.
TAB
STATE
RETURN
RETURN
CANCEL
TAB
CLIENT
TAB
PORT