Field Names and Descriptions
Issue 3 May 2002
4-41
Use this screen as follows:
â– To drop the connection to a client:
Press or use the arrow keys to move the cursor to the entry whose
connection you want to drop, and then press .
4. The following prompt appears:
Are you sure? (Y/N). Type Y
and press .
If you type N the cursor reappears where it was and the connection
is not dropped.
5. Repeat Steps 1 and 2 until you have dropped all desired
connections. Then press and the previous screen will
appear.
â– To delete a client:
1. Press or use the arrow keys to move the cursor to the entry of
the client you want to delete, and then press .
2. The following prompt appears: Are you sure? (Y/N). Type Y
and press .
If you type N the cursor reappears where it was and the client is not
deleted.
3. Repeat Steps 1 and 2 until you have dropped all desired clients.
Then press and the previous screen will appear.
To add a client, press to get to the CV/LAN Administration — Add Client
screen.
TAB
DROP
RETURN
CANCEL
DELETE
RETURN
CANCEL
ADD