CVLAN System Administration
5-28 Issue 3 May 2002
2. The following prompt appears: Are you sure? (Y/N). Type Y
and press .
If you type N the cursor reappears where it was and the connection
is not dropped.
3. Repeat Steps 1 and 2 until you have dropped all desired
connections. Then press and the previous screen will
appear.
â– To delete a client:
1. Press or use the arrow keys to move the cursor to the entry of
the client you want to delete, and then press .
2. The following prompt appears: Are you sure? (Y/N). Type Y
and press .
If you type N the cursor reappears where it was and the client is not
deleted.
3. Repeat Steps 1 and 2 until you have dropped all desired clients.
Then press and the previous screen will appear.
■To add a client, press to get to the CV/LAN Administration — Add
Client screen.
CANCEL
TAB
DELETE
ADD
To Next Page
Loading...
Need help?
General
