Returning the MAPD System to its Original State
Issue 3 May 2002
F-5
15. Restore the customer’s system configuration from the backup SanDisk
PCMCIA FlashDisk using the following menu steps:
■ Select “Maintenance” from the Main Menu.
■ Select “Removable Media Operations” from the Maintenance Menu.
■ Select Restore Configuration Data from Removable Media
Operations.
16. After the customer’s system configuration is restored, reboot the system:
■ Return to the “Maintenance” Menu.
■ Select “Reset System (CV/LAN).
■ Select Reboot System.
NOTE:
If the CV/LAN application was installed, the UNIX kernel will be rebuilt when
the system is shut down. This will take several minutes. In addition, when
the system is coming up, a new kernel environment will be setup, which may
also take a few minutes.
17. Following the reboot, have the customer log in at the login prompt.
To Next Page
Loading...
Need help?
General
