Contents
Issue 3 May 2002 v
■ Installation: Task 4a — Installing a Terminal Using a
Direct Connection to a DC Switch 2-27
Installation Procedure for a Terminal
Using a Direct Connection to a DC Switch 2-28
■ Installation: Task 4b — Installing a Terminal Using a
Direct Connection to a DC Switch 2-30
Installation Procedure for a Terminal
Using a Direct Connection to a DC Switch 2-31
■ Installation: Task 4c — Install
a Terminal Using Modem Connections 2-32
Installation Procedure for a Terminal
Using Modem Connections 2-33
■ Installation: Task 5 — Connect
the Maintenance Modem 2-35
■ Installation: Task 6 — Finalize and Test the Hardware 2-37
3 Setting up the MAPD Configuration 3-1
■ Introduction 3-1
Who Should Use this Chapter 3-1
Related Documents 3-1
■ In this Chapter 3-2
■ Task 1: DEFINITY Administration 3-3
Procedure to Configure MAPD in the Switch
and Establish a Link 3-3
■ MAPD Administration 3-6
■ Task 1: Basic Administration —
Logging in to the MAPD System 3-6
Procedure to Log in 3-7
■ MAPD Task 1: Setting the
MAPD Clock 3-9
Procedure to Set the MAPD Clock 3-9
■ MAPD Task 2: Assigning the MAPD
Machine ID (Optional) 3-11
Procedure for Assigning the MAPD Machine ID 3-11
■ MAPD Task 3: Rebooting the MAPD 3-12
Procedure for Rebooting the MAPD 3-12
■ MAPD Task 4: Testing MAPD/LAN
Connectivity (Optional) 3-13