Avaya S8700 - October; Separated Servers

110
Connecting the Hardware
October 2002
1 Install two RJ11 jack outlets wired to a single 1MB (Measured Business) telephone line.
2 Connect the RJ11 jacks, one to each server, with the modular telephone cord supplied
with the modem.
3 Connect a USB cable (supplied with the modem) from one of the modems to server 1.
4 Connect the other modem, via USB cable, to server 2.
Separated servers
NOTE:
For more information on media servers in 2 locations, refer to the job aid entitled Server
Separation—Avaya S8700 Media Server.
Each server has a dedicated telephone line.
1 Terminate the two 1MB telephone lines, one at each server, at RJ11 jack outlets.
2 Connect the modems to their respective server via a modular telephone cord supplied
with the modem.
3 Connect a USB cable (supplied with the modem) from the modem to the server at each
location.