Avaya S8700 - Circuit Pack Leds

222
Testing the Complete Configuration
October 2002
LED display indicating connectivity status
Circuit Pack LEDs
Typically, each circuit pack has 3 LEDs on the front panel. The "Circuit Pack LEDs"
table
describes the red, green, and yellow LEDs and their meaning. Also see "Circuit Pack LEDs on
Faceplate".
Figure notes
Connectivity Status 1 2 3 4 5
IPSI is connected to media server no yes yes yes yes
IPSI has an IP address no no yes yes no
Laptop computer is connected to
IPSI services port
no no no yes yes
Circuit Pack LEDs
LED
Color
Status Description
Red Alarm The media server has detected a fault in this circuit pack. The alarm
log should contain an on-board alarm. The red LED is also lit briefly
when a circuit pack is inserted or reset. If the circuit pack passes its
initialization tests, the LED goes out.
Green Testing The media server is currently running tests on this circuit pack as
part of background maintenance or demand testing. This LED is
also lit during initialization tests when a circuit pack is inserted or
reset.
Yellow Busy The circuit pack is currently in use.
ledlipsi KLC 030502
1 2 43 5