140
Installing and Wiring Telephones
October 2002
2500-Type Analog Telephone Wiring
Analog Tie Trunk Example
This example shows how to connect analog tie trunk wiring from one IP Connect or
Multi-Connect configuration to another one or any other Avaya configuration.
1 Set the option switches on the port circuit pack (such as TN760E).
2 Refer to the Job Aid entitled Option Switch Settings for detailed information.
Figure notes
1 2500-Type Analog Station 2 TN2183 Analog Line Circuit
Pack, Position 1C01
Port Circuit Pack and Telephone Pin Designations
Pin on
Modular
Plug
4-wire:
8400-Series,
606A1
2-wire: 302D,
8400-Series,
603E
8510T BRI
(with adjunct
speaker
phone)
Analog
Station,
Modem NT1
1TXT
2 TXR T
3PXT TXTR
4 T PXR T
5RPXTNo
Connection
4-pin
modular jack
R
6 PXR TXR
7 -48VDC (-48VDC) (-48VDC) -48VDC
8 GRD GRD GRD GRD
Circuit
Pack
TN754C
4-wire
digital
(8 port)
TN2181
2-wire digital
(16 port)
TN2224
2-wire digital
(24 port)
TN556D
ISDN-BRI
line
TN2183
Analog line
(16 port)
TN2198
2-wire BRI
line
PX PBX transmit T Tip (A)
TX Terminal transmit R Ring (B)
2500wire RBP 071996
3
28
03
2T
R
T.3
R.3
To Next Page
Loading...
