150
Installing and Wiring Telephones
October 2002
Example Adjunct Power Connections
Attendant Console Example
Task List: Attendant Console Procedures
• ‘‘Install the Attendant Console’’ on page 152
• ‘‘Install the 26B1 Selector Console’’ on page 152
Attendant Console Cabling Distances, Local
and Phantom Power
A console’s maximum distance from the media gateway is limited. The maximum distance for a
302D console is as shown in ‘‘Attendant Console Cabling Distances’’ on page 151
.
Figure notes
1 Typical Display Telephone
2 Individual Power Supply (Such as
1151A1 or 1151A2)
3 Information Outlet (Modular Jack)
4 4-Pair D-Inside Wire (DIW) Cable
5 Satellite Site or Adapter Location
6 25-Pair D-Inside Wire (DIW) Cable
7 Station Side of Main Distribution
Frame (MDF)
8 100P6A Patch Cord or Jumpers
9 Media Gateway Side of Main
Distribution Frame (MDF)
10 25-Pair Cable to Media Gateway
(Analog Line Circuit Pack)
11 Equipment Room
12 Satellite Location
13 Work Location
14 Bulk Power Supply (such as 1145B)
cydfadjn KLC 020599
1
2
3
4
5
6
7
8
9
10
1112
13
14 14
To Next Page
Loading...
