61
Installing the Avaya G600 Media Gateway
October 2002
Front view of Avaya G600 Media Gateway
Check Circuit Packs
1 Ensure all circuit packs are fully inserted into the proper slots according to the Customer
Service Document (CSD).
Report any discrepancies in circuit pack type or quantity to your Avaya representative.
‘‘Comcodes for equipment used with Avaya G600’’ on page 61
lists the comcodes for
equipment used with the Avaya G600 Media Gateway. If “Optional” is checked, the
equipment may or may not be necessary, depending on the site configuration.
Figure notes
1 ESD Ground Jack
2 650A Power Supply
3 TN2312AP IP Server Interface
Circuit Pack
4 TN799DP C-LAN (optional)
5 TN2302 IP Media Processor
6 Accessory compartment
7 Cable pass-through (if needed)
Comcodes for equipment used with Avaya G600
Comcode Description Optional
848627204 Door
848627147 Bottom Panel
700017932 Mounting Kit (Screws)
700019292 Time-division multiplexing/local area network
(TDM/LAN) Bus Cable (for connection between the
media gateways)
X
848525887 IP Media Processor Adapter
2
1
scdlff01 LJK 031102
5
6
7
3 4
102 3 4 5 6 7 8 9
Power
1
To Next Page
Loading...
