112
Connecting to the Customer’s Network
October 2002
CAT5 cable connected to a port on the back of the Avaya™ S8700 Media Server
TN799DP Control LAN
The TN799DP Control LAN circuit pack serves two purposes:
• A connection for the signaling (telephone) network to the customer’s data network for IP
telephones.
• A source board for downloading firmware to circuit packs having the "P" designation.
• An IP interface for adjuncts such as Intuity Audix
• An IP interface for DCS connection with another Avaya configuration.
See the Avaya MultiVantage Solutions Hardware Guide for more information.
The following sections describe the process:
• ‘‘Check your shipment’’ on page 113
• ‘‘Install a TN799DP C-LAN’’ on page 113
• ‘‘Install the cables’’ on page 113
• ‘‘Install the circuit packs’’ on page 114
• ‘‘Administer the TN799DP’’ on page 115
• ‘‘Test the External Connection to the LAN’’ on page 116
Figure notes
1 To network (S8700 IP Connect)
2 To network (S8700 Multi-Connect)
cadlnetw KLC 051602
1
2
2
1
554433
22
DAI - 1
DUP
MEMORY
LINE
RECEIVE
TRANS
LINK
STAT
AVAYA
To Next Page
Loading...
