Avaya S8700 - Add Media Gateways; Input Translations; Reset Media Server

53
Customizing the Active Media Server
October 2002
Input Translations
Contact the installation personnel responsible for translation input to download translations.
1 Type save translations and press Enter to save the translations to the hard drive.
If the translations are not ready, you may continue with the process, entering minimal
translations to verify connectivity to the port networks.
Reset Media Server
NOTE:
Do not reset the media server if no translations were input or if they were not entered in
bulk.
The following administration uses the services laptop computer connected to the active media
server and uses Avaya Site Administration.
1 If not already open, launch Avaya Site Administration.
2 Log into the active media server as craft.
3 Type reset system 4 and press Enter to have the call processing software read the copied
translations.
Add Media Gateways
NOTE:
Do this procedure only if the translations were not input earlier.
The following administration uses the services laptop computer connected to the active media
server and uses Avaya Site Administration.
NOTE:
A cabinet is defined as up to 4 G600 media gateways mounted in a rack and
TDM-connected.
1 Type add cabinet number (1 through 64) and press Enter for each G600 media gateway
stack controlled by one TN2312AP IPSI circuit pack.