Avaya S8700 - Connecting to the Customer’s Network

85
Cabling the G600 Media Gateways
October 2002
Install Circuit Pack Adapters
1 Install the IP Media Processor adapter(s) and 259A C-LAN adapter(s) (if used) on the
appropriate connectors on the back of the media gateways. See ‘‘Avaya G600 adapter
connections’’ on page 85.
2 Install the IP Server Interface adapter to the slot 2 connector on the back of media
gateway A.
Avaya G600 adapter connections
Connecting Media Gateways to the Phone
Network
Media gateways are connected to the phone network through either a main distribution frame
(wallfield) built on a wall in a phone closet or patch panels mounted in a rack.
• ‘‘Install the Main Distribution Frame (MDF) Hardware’’ on page 86
• ‘‘Install Patch Panels’’ on page 91
Figure notes
1 IP Media Processor adapter
2 259A adapter for C-LAN (if used)
3 IP Server Interface adapter (slot 2)
crdladp LJK 022302
2
1
3