Avaya S8700 - Upgrade the IPSI Firmware (if Necessary); Enable and Disable Ethernet Switch Ports

190
Completing the Installation Administration
October 2002
1 Click View Current Alarms to clear any alarms
2 Resolve all alarms not involving the busied out standby server. Refer to the maintenance
documentation for information on how to resolve alarms.
Upgrade the IPSI firmware (if necessary)
The following administration is done on a computer used to access the active media server
using the media server Web interface.
You may need to upgrade the firmware on some or all the IPSIs. Each IPSI must be on the same
firmware load.
1 Click View IPSI Version and select "Query All." Verify that all the IPSI circuit packs
have the same and most uptodate IPSI firmware.
2 If the firmware needs to be updated on any of the IPSI circuit packs, refer to the
Upgrading section for information on downloading and upgrading the IPSI firmware.
Enable and disable Ethernet switch ports
The following administration is done on the services laptop computer connected to the active
media server using the S8700 Media Server Web Interface.