69
Installing the Avaya G600 Media Gateway
October 2002
Mounting the media gateway in medial position.
Mount Two to Four Media Gateways
When mounting more than one media gateway in a rack, mount
• Media gateway B directly above media gateway A
• Media gateway C directly above media gateway B
• Media gateway D directly above media gateway C.
Refer to Cabling Multiple Media Gateways for specific information on installing the TDM
cables between multiple media gateways in a rack. EMI gasket(s) must be installed before
mounting cabinets B, C, and D.
Peel the paper backing from the gasket and install it on the unpainted outlined area on top of the
media gateway, if facing the front, on the right for media gateways A and C or left for media
indprac3 KLC 101901
1
0
1
2
3
4
5
6
7
8
9
P
o
w
e
r
To Next Page
Loading...
