Avaya S8700 - Remotely over the Network; Starting Avaya Site Administration

52
Customizing the Active Media Server
October 2002
5 Click on File > New > Switch.
6 Follow the Add Switch wizard to build a record.
• Give the record a name that indicates it works with all Avaya S8700 Media
Servers, such as S8700-Service-Port.
• Select Network Connection as the connection method
• Use IP address 192.11.13.6
• Use port 5023
7 When the record is established, test it by connecting to the media server.
Remotely over the network
The following administration is done on a computer connected to the customer’s LAN.
The Avaya Site Administration switch record to connect to the active media server will be
unique for each customer.
1 Under Telephony Administration click Download ASA to download Avaya Site
Administration 1.11 to the computer.
2 Follow the steps in the Setup wizard to install ASA on the computer.
NOTE:
The following procedure establishes a record for use when connected to the Avaya S8700
Media Server.
3 On the computer launch Avaya Site Administration
4 Click on File > New > Switch.
5 Follow the Add Switch wizard to build a record.
• Give the record a name that indicates it will work with all Avaya S8700 media
servers.
• Select Network Connection as the connection method
• Use the IP address assigned to the active media server
• Use port 5023.
6 When the record is established, test it by connecting to the media server.
Starting Avaya Site Administration
1 Under Telephony Administration click Start ASA to launch Avaya Site Administration
on the computer.
2 When prompted, log in.