28
Configure Media Server 1
October 2002
Upgrade media server software (if necessary)
If a software upgrade is required.
1 Click the X in the upper right-hand corner to close the configure server window when the
Review Notices screen displays.
2 Click the Upgrade tab above and go to Upgrading Software on an Initial Installation of
an Avaya S8700 Media Server to upgrade to the latest issue of software.
3 After the software upgrade is complete, go to ‘‘Continue Server 1 configuration’’ on
page 28.
If a software upgrade is not required, continue with the configure server process.
Continue Server 1 configuration
1 Under Server Configuration and Upgrades click Configure Server to restart the
configure server process. If a software upgrade was not performed continue on with the
next step.
2 Click through the Review Notices to get to the Select method for configuring server
page.