Avaya S8700 - Page 29

29
Configure Media Server 1
October 2002
3 Select "Configure all services using the wizard." and click Continue to get to the Set
Server Identities: page.
NOTE:
Most of the fields are populated with default settings. Do not change the defaults unless
the customer’s network administrator requests it (refer to the filled-out job aid entitled
Pre-Installation Network Planning Forms—S8700 Media Server).
4 Fill in the fields on this and the subsequent pages:
• Configure Interfaces
• Configure LSP
• Configure Switches
• Set DNS/DHCP
• Set Static Routes
• Configure Time Server
• Set Modem Interface
• Update System