215
Testing the Complete Configuration
October 2002
• "Attendant Console LEDs"
• "Terminal Alarm Notification"
• "Circuit Pack LEDs"
• "DS1 Converter Circuit Pack LEDs"
• "SPAN LEDs"
• "IP Server Interface LEDs"
S8700 Media Server LEDs
The media server has the LEDs shown in "LEDs on front and back of media server"
:
LEDs on front and back of media server
Testing the Media Server LEDs
You can test some of the LEDs on the front of the media server through the media server Web
interface. This makes sure that the Active/Standby and U2 LEDs (on the front of the media
Figure notes
1 Power
2 Configuration fault
3 Hard drive activity
4 Network activity (CNA)
5 Service—configuration health
6 Active or standby mode indicator
7 U2 (not defined)
8 4 NIC ports (the numbers indicate
their assigned Ethernet ports)
9 LEDs for the NIC ports (some NICs
may not have LEDs)
10 LEDs for fiber optic duplication
connectivity
11 Status LED (not used)
1
SERVICE
U2
STANDBY
ACTIVE
2
1
55 44 33
22
DAI - 1
DUP
MEMORY
LINE
RECEIVE
TRANS
LINK
STAT
AVAYA
1 2
3 44 5
6
7
9
10
11
8
scdlled KLC 030502
To Next Page
Loading...
