200
Accessing the Avaya S8700 Media Server
October 2002
You can download Avaya Site Administration to your computer two different ways: from the
Avaya Site Administration software CD or from the S8700 Media Server.
From the Avaya Site Administration CD
Place the Avaya Site Administration software CD in the CD-ROM drive and follow the
installation instructions in the install wizard.
From the S8700 Media Server
1 Connect to one of the media servers either directly or through the network from the
computer you want Avaya Site Administration to be installed on.
2 Access the media server Web interface by typing in the Location/Address field
192.11.13.6 (direct connect) or the IP address or the domain name of the media server
(over the network).
3 Log in and get to the main menu.
4 Under Telephony Administration click Download ASA to download Avaya Site
Administration l.11 to the computer.
5 Follow the steps in the Setup wizard to install ASA on the computer.
NOTE:
The following procedure establishes a record for use when connected to the Avaya S8700
Media Server.
6 On the computer launch Avaya Site Administration
7 Click on File > New > Switch.
8 Follow the Add Switch wizard to build a record.
• Give the record a name that indicates it will work with all Avaya S8700 media
servers.
Printer port Standard PC or network printer port is required for
connecting to a printer to produce station button labels.
Network adapter Required for network access to the Avaya S8700 Media
Server, AUDIX, and other network-connected systems.
Free serial ports One free serial port capable of 9600-bps operation is
required for a connection to each serial device (UPS).
We recommend that PCs have at least a 16550A UART or
16550A UART simulator (capable of 56 kbps DTE-speed
connections). USB and internal modems should emulate
this hardware.
A second serial port is required for simultaneous
connection to AUDIX through a serial connection.
Minimum requirements to run Avaya Site Administration
To Next Page
Loading...
