191
Completing the Installation Administration
October 2002
1 Under Miscellaneous, click Enable/Disable Ethernet Switch Ports to enable the
Ethernet ports being used and to disable the unused Ethernet ports
Back up the media server to PCMCIA flashcard
The following administration is done on a computer used to access the active media server
using the media server Web interface.
1 Place the PCMCIA flashcard into the bottom slot of the PCMCIA drive in the active
media server.
2 Click Backup Now and select all applicable data sets.
Select "Save ACP translations prior to backup" to save translations to the media server’s
system disk before backing up the data.
Figure notes
1 Media Server
2 PCMCIA flashcard
3 Bottom slot of PCMCIA drive
h1dlopt LJK 030102
1
2
3
To Next Page
Loading...
