Avaya S8700 - Set Date and Time; Set Media Server Configuration Type

27
Configure Media Server 1
October 2002
If the software version resident on the server is equivalent to the required version, the
server will not require a software upgrade during initial installation. If the software
version resident on the server is older than the required version, you must upgrade the
software on the S8700 Media Server.
Set Date and Time
The following administration uses the services laptop computer connected to media server 1
and uses the media server Web interface.
1 Under Server click Set Server Time/Timezone to set the current time, date, and time
zone settings.
2 Click Submit.
Set media server configuration type
When a server is first initialized and configured it is necessary to set the configuration type (IP
Connect or Multi-Connect). Refer to the filled-out job aid entitled Pre-Installation Network
Planning Forms—S8700 Media Server for the proper configuration type information.
1 Under Server Configuration and Upgrades click Configure Server to open the first page
of the Configure Server process.
NOTE:
For help with any of the Web pages, click About This Screen on the Web page or Help at
the top of the main menu.
2 Select "Avaya S8700 Media Server for IP Connect Configuration" and click Continue.