EasyManua.ls Logo

Avaya S8700 - Test External Ringing; Test Integrated Announcement; Test Queue Warning Indicator; Test Selector Console

Avaya S8700
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
210
Testing the Complete Configuration
October 2002
Each row of lamps on the console lights and goes dark in sequence from top to bottom.
3 Press Start and listen for dial tone.
4 The green lamp associated with Idle Call Appearance lights up.
The Position Available lamp goes dark.
5 Dial number associated with a working telephone.
Audible ringing tone is heard in ear piece.
6 Press Release.
Audible ringing tone is silenced. The green lamp associated with idle call appearance
button goes dark. The Position Available lamp lights.
Test Selector Console
Check that all selector console lamps are operational. Make call to a telephone in the
configuration.
1 Simultaneously press and hold the Ringer Volume up button and the POS BUSY button
on the attendant console. This puts the console in the self-test mode.
2 Each row of lamps on the selector console lights and goes dark in sequence from top to
bottom.
3 Press hundreds group select button. The hundreds group select lamp lights and any lamps
associated with busy telephone light.
4 Press Direct Extension Selection (DXS) button for the desired extension. Audible
ringing tone is heard in the ear piece on attendant console.
5 On attendant console, press Release. Audible ringing tone is silenced.
Test External Ringing
Make a test call to the attendant console to verify ringing device sounds when the Night lamp on
console is lighted. If ringing device has not been installed by customer, connect spare telephone
to information outlet reserved for ringing device and make test call.
Test Queue Warning Indicator
Make a test call to an extension associated with a Uniform Call Distribution (UCD) or Direct
Department Calling (DDC) group, and verify the queue warning indicator lamp lights. If the
queue warning indicator has not been installed by customer, connect a spare telephone to the
information outlet reserved for queue warning indicator and make a test call.
Test Integrated Announcement
The TN750B/C and TN2501AP Announcement circuit packs provide the ability to store
messages. The messages can be recorded from telephones on- or off-premises and have flexible

Table of Contents

Other manuals for Avaya S8700

Related product manuals