Avaya S8700 - Register the System

194
Completing the Installation Administration
October 2002
4 At the prompt type almsnmpconf -d ipaddress -c community name and press
Enter. Where ipaddress is the trap receiver address for the SSG device and
community name is the community string name required by the SSG device.
5 Type almsnmpconf and press Enter. Verify that the correct information was
entered.
6 At the prompt type almenable -s y and press Enter.
7 Type almenable and press Enter. Verify that the SNMP alarm origination is
enabled. If used, verify that alarm origination via modem is still enabled.
Register the system
Follow the existing process and procedures to register the Avaya™ S8700 Media Server.
Let customers know what the default LAN security settings are; they may want to change them
after installation. Make sure they are aware that if the following items are not set, they will not
have remote access to the media servers:
• telnet—no Telnet access
• https—no Web access
• def-sat—no Avaya Site Administration access (on Advanced screen)