90
Cabling the G600 Media Gateways
October 2002
Main Distribution Frame Labels
‘‘Label Graphic Symbols and Nomenclature’’ on page 90
shows the graphic symbols used on
labels for the system, cross-connections, information outlets, and cables. The labels are
color-coded to identify system wiring:
• Green — To Central Office (CO)
• Purple — To system ports
• Yellow — To auxiliary equipment and miscellaneous system leads
• Blue — To information outlets
• White — From Main Distribution Frame to satellite locations (3-pair)
Each label identifies 2 rows on the terminal block. The upper half identifies the row above it,
and the lower half identifies the row below it. The labels are inserted into the clear plastic
designation strips furnished with the terminal blocks. The strip is snapped in place between the
terminal block rows. Label code number 1220A (comcode 103970000) contains all of the
required labels.
Label Graphic Symbols and Nomenclature
Figure notes
1 Floor or Building Identification
(write as required)
2 Media Gateway
3 Carrier (leave blank for G600)
4 Slot
5 Information Outlet
6 Site/Satellite Closet
7 Tie Circuit
8 Floor
9 Building
r758422i LJK 050996
To Next Page
Loading...
