Avery Dennison SNAP 500 - Page 5

User’s Manual—SNAP™ 500 Gen 1 and Gen 2
Classification: Avery Dennison - Public
4.3.1 Printer Control Panel 37
4.3.2 Printing 38
4.3.3 Feeding the stock 39
4.3.4 Errors 39
4.3.5 End of Day 39
4.3.6 Clearing Print Jobs 40
4.4 Using Pre-printed Stock 40
4.4.1 Selecting the Sensor 40
4.4.2 Aligning the Stock to the Sensor 40
4.5 Option Menu System 41
4.5.1 Running Test Patterns 42
4.5.2 Setting / Adjusting Voice Button Volume 44
5.0 MAKING ADJUSTMENTS 45
5.1 Print Head Adjustments 45
5.1.1 Adjusting Print Head Pressure 45
5.1.2 Adjusting Density (Darkness) 46
5.2 Adjusting the Stacker 46
5.2.1 Stacker Position 47
5.2.2 Stacker Angle 47
5.2.3 Platform Angle 48
5.2.4 Height of Stack - Stacker Sensor 48
5.2.5 Static Brush 49
5.3 Virtual Control Panel 50
5.3.1 Introduction 50
5.3.2 Changing Printer Settings in PCMate 51
5.3.3 Print/Cut Adjust Tab 52
5.3.4 Selecting the Printer Language 53
5.3.5 Setting the Date and Time 53
5.3.6 Enabling or Disabling the Cutter 54
5.3.7 Selecting the Print Speed 54
5.3.8 Selecting the Flagging Mode 55
5.3.9 Selecting the Sense Mark Type 55
5.3.10 Setting the Default Transfer Type 55
5.3.11 Viewing the Life Counts 56
5.3.12 Firmware Version 56
5.3.13 Print Quality 57
5.3.14 Other information on VCP 57
5.4 Web Server 58
5.4.1 Viewing and Changing the Printer Settings 58
5.4.2 Converting the DHCP Address to a Static Address 59
5.4.3 Resetting the Printer to DHCP Mode 60
5.4.4 Troubleshooting the Network Connection 60
6.0 MAINTENANCE 61
6.1 Print Head Cleaning and Handling 61
6.1.1 Handling Techniques 61
6.1.2 Cleaning Procedures 62
6.2 Print Head Replacement 63
6.3 Lubrication 65
6.4 Rotary Knife Assembly 65
6.4.1 Removing and Replacing the Knife Assembly 66
6.4.2 Adjust the Knife Home Position 67