User’s Manual—SNAP™ 500 Gen 1 and Gen 2
Classification: Avery Dennison - Public
6.5 Knife Blade Cleaning 67
6.5.1 Cleaning Procedure 67
7.0 SERVICE ADJUSTMENTS 69
7.1 Tape (Web) Guide Position 69
7.2 Tape (Web) Guide Width Adjustments 69
7.3 Auxiliary Feed 69
7.4 Knife Shear Adjustment 69
7.5 Feed Assembly Adjustment 71
8.0 UPGRADING THE PRINTER FIRMWARE 73
8.1 Introduction 73
8.2 Selecting the UPG file 73
8.3 Getting the UPG file 74
8.3.1 Getting UPG file using D2Comm 74
8.3.2 Getting UPG file without using D2Comm 74
8.4 Performing the Upgrade 75
8.4.1 Unzipping the file 75
8.4.2 Upgrading through PCMate 76
8.4.3 Upgrading through USB Flash Drive 79
8.4.4 Upgrading through the Webserver 79
9.0 ELECTRICAL TROUBLESHOOTING 83
9.1 Power Up / Sign On / Communications 83
9.2 Tape / Ink Advance 86
9.3 Print 87
9.4 Cut / Stack 89
9.5 Printer Errors 90
10.0 MECHANICAL TROUBLESHOOTING 94
10.1 Tape 94
10.2 Ink 95
10.3 Print 95
10.4 Knife 95
10.5 Minimum Cut Length 96
10.6 Stacker 96
11.0 APPENDICES 98
11.1 Ink and Tape Transfer Types 98
11.2 Tape/Ink Transfer Types to Use When Not Found in PCMate 100
11.3 Printer Specifications 102
11.4 Mini Web Guide Adapter 104
11.5 Programming Contrast Sensors 105
To Next Page
Loading...
