Avery Dennison SNAP 500 - Page 7

User’s Manual—SNAP™ 500 Gen 1 and Gen 2
Classification: Avery Dennison - Public
11.6 Using the Web Guide Hole Sensor 107
11.7 Warranty Policy 108
11.8 Service 109
11.9 Option Menu System Flowchart 110
12.0 ELECTRICAL ASSEMBLY DRAWINGS 111
12.1 Electrical System Schematic 112
12.2 Harness Connections 114
13.0 MECHANICAL ASSEMBLY DRAWINGS 115
13.1 Unwind Assembly – Gen 1 116
13.2 Unwind Assembly – Gen 2 117
13.3 Unwind Assembly – Gen 2 118
13.4 Guide Assembly – Gen 1 and 2 119
13.5 Guide Assembly – Gen 1 with Hole Sensing 120
13.6 Print Head Assembly – Gen 1 121
13.7 Print Head Assembly – Gen 2 122
13.8 Swing Arm Assembly – Gen 2 123
13.9 Ink Unwind / Rewind Assembly – Gen 1 124
13.10 Ink Unwind / Rewind Arbor Assembly – Gen 2 125
13.11 Ink / Unwind Motor Assembly – Gen 2 126
13.12 Feed – Drive Train Assembly – Gen 1 127
13.13 Feed Assembly – Gen 2 128
13.14 Knife – Drive – Nip Roller Assembly – Gen 1 129
13.15 Drive Assembly – Gen 2 130
13.16 Knife Assembly – Gen 2 131
13.17 Nip Roller Assembly – Gen 2 132
13.18 Short Feed Option – Gen 1 133
13.19 Covers Assembly – Gen 1 134
13.20 Covers Assembly – Gen 2 135
13.21 Fan Assembly – Gen 1 136
13.22 Electrical Components Assembly – Gen 2 137
13.23 Turn Bar / Stacker Mount Assembly – Gen 2 138
13.24 600DPI Machine Parts List – Gen 1 139
13.25 600DPI Machine Parts – Gen 2 140
13.26 Upright Frame Assembly – Gen 1 141
13.27 Stacker 142
13.28 Label Stop 143
14.0 REVISION RECORD 145